The design aluminum bar...
is suitable for installing the T-STRIPE window heater to prevent condensation/condensation water on the window. It transfers the heat from the heating element perfectly to the window and radiates additional heat into the room.
Appearance and effect of the design aluminum bar:
Not only does it look very elegant, it also makes installation easier. The effect of the T-STRIPE heating element is exactly the same with the design aluminum bar as without it.
Installation:
The aluminum bar is cut to fit the window and mitered at the corners. The heating element is threaded into the square aluminum profile tube and glued to the window pane. Once all four sides have been installed, the T-STRIPE heating element is connected. When in operation, it heats the edge area of your windows so that no condensation/condensation water can form on the window pane. This puts an end to wiping and prevents mold from forming in the first place.
The surface is
- anodized and suitable for all windows
- white powder-coated (like RAL 9016) and particularly suitable for white windows
- anthracite powder-coated (like RAL 7016) and therefore particularly suitable for dark windows
Details about the design aluminum bar:
- Square tube
- Cross-section: 7.5 x 7.5 mm
- Wall thickness: 1 mm
- Length: 1.0 m or 2.0 m
- Minimum quantity = 4 pieces
- With double-sided adhesive tape
Login
1 review
December 4, 2015 1:01 PM
Sieht gut aus, klebt zuverlässig und schränkt die Funktion nicht ein
Die Alu-Leisten lassen sich gut verarbeiten und der Klebestreifen ist so dünn, dass die Funktion nicht beeinträchtigt wird. Mit der Leiste muss nicht befürchtet werden, dass der Heizdraht bein Fensterputzen gelöst wird.